Часто при прошивке телефона не всегда есть подходящий кабель или софт. Не проблема, многое можно сделать через инженерное меню самого телефона.
Поделюсь тем , что есть у меня. Знаете больше дополняйте)
Samsung
All type of phones (old modeles):
NAM programming: 47*869#08#9
Test mode: *759#813580 or 5809540*45680
exit test mode - 02
A-Key: menu + 0, code 25##
Samsung A500
1. Enter ## and the 6 digit OTKSL
2. SERVICE MENU will appear and 1.Basic will be highlighted
3. Press OK
4. Device will display NAM CDMA/ Phone Number
5. Enter 10 digit MIN
6. Press OK (3 times)
7. Display will return to Service Menu. Press END.
8. Programming is complete
Samsung N240 and N400
1. Enter ## and type in the 6 digit OTKSL
2. The display will show SVC MENU and 1. Phone Number
3. Press OK
4. Enter the 10 digit MIN and press OK
5. The display will show NAM with Home SID on the second line (Note: SID is no longer used)
6. Press OK
7. The display will return to the SVC MENU
8. Press END to complete the programming
Samsung Uproar
1. Press MENU key
2. Enter 9 2 0
3. Enter the OTKSL
4. At SVC Menu screen press OK
5. Enter MIN and press OK 4 times
6. Enter SID (4654) and press OK
7. Press END key
8. Programming is complete
Samsung N300
1. Press ## followed by the OTKSL
2. SVC menu will be displayed
3. Press 1 for Phone #
4. Enter the 10 digit MIN and press OK
5. MIN that was entered will be displayed press OK
6. SVC Menu will display press 3 for NAM
7. Enter the 4 digit Home SID press OK
8. Press END and handset will power cycle
Samsung i300
1. Tap on the Phone Icon with stylus
2. Press #907*9#0 ENTER LOCK should appear on screen
3. ENTER OTKSL
4. SVC MENU will appear press 1
5. Enter 10 digit MIN and then press SAVE
6. Press SAVE again
7. Press 3 and then press SAVE 6 times
8. Enter the HOME SID and press SAVE once
9. Press END key twice
Samsung A400 and A460
1. Enter ## and OTKSL
2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)
3. Enter 10 digit MIN and press OK
4. At 1.Basic Menu press the END key
5. Handset will power cycle
Samsung 3500 8500 6100 N200
1. Press MENU
2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)
3. Enter OTKSL
4. Press 1 at SVC MENU Screen
5. Enter MIN and press OK
6. Press OK 4 times
7. Enter SID (4654) and press OK
8. Press END key
9. Programming is complete
Qualcomm
QCP-800 programming: menu + 3 + 0.
SPC: "000000" or may be other SPC typed by user.
QCP-820/1920/2035: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.
QCP 1960 and 2760
1. Press softkey under the work MENU
2. Press 8 0
3. Enter the OTKSL
4. Press softkey for OK
5. Enter MIN and press softkey for OK
6. No SID is require for this handset
7. Press softkey for EXIT
8. Programming is complete
LG
LGC-300 programming: menu + 9 and enter SPC: "000000" or may be other SPC typed by user
A-Key: press STO for some time while you can see special code enter zone. Type 2539** and enter A-key
LGC-330W programming: menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-800W /500 programming: menu + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LGC-510 programming: menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user.
A-Key: type 2539** and enter A-key
LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. Scroll to MIN and press OK
5. Enter 10 digit MIN scroll to SAVE and press OK
6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete)
7. Enter SID (4654) and scroll to SAVE and press OK
8. Programming is complete
LG5350
1. Enter ## and enter the OTKSL and press the left soft key under the word “Save”
2. At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key
3. Enter the 10 digit MIN and press OK
4. Scroll down to 4. Advanced and press OK
5. Scroll to NMSI and press OK
6. Enter the MSID and press OK
7. Scroll down to 9. Amps Phone # and press OK
8. Enter the MSID and press OK
9. Press the END key
TP 2100
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press Roller Ball in for OK (ESN will display)
4. Select NEXT (by pressing in the roller ball)
5. Scroll to EDIT and press in the roller ball
6. Enter MIN
7. Scroll to SAVE and press roller ball in
8. Select NEXT at the next 3 screens and then EXIT
9. Programming is complete
TP3000
1. Press ##
2. Enter OTKSL
3. Scroll to SAVE and press OK
4. Open flip
5. Use Stylus to enter the 10 digit MIN
6. Press OK (No SID entry is required)
7. Programming is complete
TP 5250
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. The phone display will read SVC Program
5. Scroll to MOBILE PHONE # and press OK
6. Phone display will read Mobile Phone Number
7. Enter the 10 digit MIN and press OK
8. Scroll to Home SID and press OK
9. Enter the 4 digit SID (4654) and press OK
10. Reset Phone will be highlighted. Press OK
11. Phone will reset
12. Programming is complete
LG V111(DM110)
[menu]30.
After ask lockcode, enter: 843691.
Ericsson
Programming:
Shot NAM 987 + menu
Long NAM 923885 + menu and enter SPC: "000000" or may be other SPC typed by user.
CDMA mode 904093 + menu
Analog mode 904095 + menu DM mode 904959 + menu
Hyundai
HGC-120E / -130E programming: #86904**89397#
HGC-600E programming: ##20022002, END and enter SPC: "000000" or may be other SPC typed by user.
Sony
CM-M1300/3300/Z200 programming: type "111111" and press Jog Dial.
Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.
Sony CM-M1300
1. Power phone on
2. Enter six "1s" ( 111111 )
3. Press the jog dial in
4. Press the jog dial in again to select programming
5. Enter six "0s" for the service security code
6. Phone displays the ESN
7. Press the jog dial in for OK
8. Enter your ten digit cellular telephone number
9. Press the jog dial in for OK
10. Enter your cellular carrier’s system ID (SID) without the zeros
(Example: if your carrier’s system ID is 00035, enter just 35)
11. Press the jog dial in for OK
12. Enter a name for NAM 1 or just press the jog dial in for OK
13. Phone displays Basic NAM 1 Programming is complete
14. Press the jog dial in
15. Press the jog dial in again for EXIT
16. Phone powers itself off
17. Press the power button to power the phone back on
18. Basic programming is complete
Motorola
StarTAC 7760/7860 programming:
Service menu: FCN+0+000000+000000+RCL
Test mode: FCN 00**83786633 STO
V60c programming:
Service menu: 74663 # [Menu] [Menu] (programming code)
Test mode: [Menu] 073887 * (security code = 000000)
Motorola Tarpon (120x)
1. Press 74663 (spells PHONE)
1. Press # MENU MENU quickly
2. Enter OTKSL
3. The work MIN will be highlighted
4. Select the word CHANGE by selecting the top right button
5. Select DELETE. Press and hold the button until clear
6. Have the customer enter the 10 digit MIN number
7. Select OK with the top right button. The “User Activation” screen will appear
8. Scroll to highlight the CDMA Sys ID
9. Select CHANGE by selecting the top right button
10. Enter SID
11. Select OK by selecting the top right button
12. Select DONE with the top left button
13. Press the END key
14. Press # MENU MENU quickly
15. Enter OTKSL
16. The work MIN will be highlighted
17. Select the word CHANGE by selecting the top right button
18. Select DELETE. Press and hold the button until clear
19. Have the customer enter the 10 digit MIN number
20. Select OK with the top right button. The “User Activation” screen will appear
21. Scroll to highlight the CDMA Sys ID
22. Select CHANGE by selecting the top right button
23. Enter SID
24. Select OK by selecting the top right button
25. Select DONE with the top left button
Press the END key
Motorola Phones (ALL)
1. Enter 74663 # FCN FCN
2. Enter OTKSL
3. Enter MIN and press STO
4. Enter SID (4654) and press STO
5. Press STO again – programming is complete
Note: on the Tarpon (120C) you will need to press the MENU key instead of FCN.
Nokia
5185/6185 programming: *3001#12345#
Software version: *#837# or *#VER# or *#9999#
Serial / ESN: *#92772689# or *#WARRANTY#
Phone reset: *#75681# or *#75682#
Nokia 6185-5170
1. Press *#639#
2. Enter OTKSL and press OK
3. Enter the MIN and select OK
4. Enter the SID and select OK
5. Programming is complete
Nokia 3585
1. Enter ## followed by the OTKSL
2. Number (MDN) is highlighted. Press the upper left-hand soft key to select
3. Mobile Number will display. Enter the 10 digit MIN
4. Press OK
5. IMSI will appear. Press and hold the Clear key until the display is empty.
6. Enter 31000 plus the MSID (15 digits total)
7. Press the upper left hand soft key and select OK
8. It will take you back to the SVC Programming. Press the upper right hand soft key to select EXIT
9. Press END.
10. Phone will power cycle and programming is complete.
SK Teletech
SK-IM 1000/1400/2000/2200/2400 programming: #7583538324#626#
Getrun 2000
System NAM programming mode: 0 + 1 + # + 7 + 3 + 7 + SECURITY CODE (000000)
Debug menu: 0 + 1 + # + 3 + 2 + 4 + SECURITY CODE (000000)
Debug screen of field test mode: 0 + 1 + # + 7 + 2 + 7
Test mode: 0 + 1 + # + 7 + 6 + 4 + SECURITY CODE (000000)
System test mode: 0 + 1 + # + 7 + 6 + 8 + SECURITY CODE (000000)
NEOPOINT
Neopoint 1000
1. Press M to display Main Menu
2. Scroll to PREFERENCES
3. Press softkey under SELECT
4. Enter 040793
5. Scroll to PROGRAMMING
6. Press softkey under SELECT
7. Enter OTKSL
8. Press softkey under DONE
9. Scroll to PHONE NUMBER
10. Enter 10 digit MIN
11. Scroll to HOME SID
12. Enter SID (4654)
13. Press softkey under SAVE to exit
14. Programming is complete
NEOPOINT 1600
1. Power the phone on
2. Press the "Menu" key
3. Scroll to "Preferences" - press "Select"
4. Key in the "Field Service Code" (the phone will not prompt you for the code)
at the "preferences" screen to access the "Service" menu (Default code is "000000")
5. Scroll to "Programming" - press "Select" - the phone will ask for the "Subsidy Lock Code"
6. Enter the "Subsidy Lock Code(654321)" to access the "NAM" menu
7. Select the NAM to be programmed (NAM 1 or NAM 2)
8. Program the NAM - Phone number and CDMA Home SID
9. After programming has been completed press "Save" - the phone will reset
Audiovox
Audiovox 9100
1. Press ##
2. Enter the OTKSL
3. Display will read Service/Menu 1 Basic…press OK
4. Next screen will read Service Mode/Home SID…press OK
5. Next screen will read Service Mode/Home SID…press OK
6. Device will display Service Menu 1. Basic #
7. Press END button to complete programming
Handspring TREO
1. Open the flip and press the PHONEBOOK button one time to display the dial pad
2. Enter ## and the OTKSL using the numbers on the Dial Pad
3. Press the handset button shown in the diagram above
4. At the Activations screen enter the MIN in the phone number field using the numbers on the device keyboard
5. Put a check in the Enable Number Portability box and type the MSID in the MSIN field
6. Press OK
7. The device will display the network search pop-up and return to the Phonebook display
Hitachi P300
1. Enter ## and the 6 digit OTKSL
2. Press the Options soft key and then scroll to Save Phone #. Press the OK soft key.
3. At the NAM display scroll to EDIT and press the OK soft key
4. Display will read NAM and MDN will be highlighted. Press the OK soft key.
5. At the MDN display enter the 10 digit MIN and press the SAVE soft key.
6. At the Save prompt press the OK soft key. The next display will show several options that should not edited.
7. Press the EXIT soft key and the device will power cycle.
8. Programming is complete.
Kyosera
Kyocera 2345 1135
1. Press 111111 (#1 key 6 times)
2. Option will be highlighted
3. Press OK
4. Scroll down to Programming
5. The service programming dialog will appear Enter Security Code.
6. Enter the 6 digit OTSKL (code will show as asterisks on screen)
7. Service Options will appear
8. Scroll down to the BASIC NAM1 Info
9. Press OK
10. Select the Phone Number by pressing the OK key
11. Using the keypad enter the 10 digit MIN
12. Press OK
13. Press END to complete the programming
Kyocera 6035
1. Press 1 six times (111111) and select OPTIONS
2. Select PROGRAMMING
3. Open flip
4. Tap the OTKSL on keypad on the screen. Tap OK
5. Tap on the PHONE NUMBER field. Enter MIN.
6. Leave A-KEY blank
7. Enter HOME SID (4654)
8. Tap SAVE & EXIT
9. Tap YES
10. Phone will be in OFF MODE Close flip.
Kyocera 3035
1. Press 111111 (the #1 key six times)
2. Options will be highlighted
3. Press in the navigation key (Navigation key is the button located between the TALK & END key)
4. Scroll to PROGRAMMING using the Navigation key
5. Select PROGRAMMING by pressing in the Navigation key
6. Enter the six digit OTKSL and press in the navigation key
7. SERVICE OPTIONS will appear
8. Scroll down to the Basic NAM1 info
9. Press in the navigation key
10. Clear any numbers that may appear using the “clear” key (arrow key located directly below the navigation key)
11. Select the PHONE NUMBER by pressing in the navigation key
12. Enter the 10 digit MIN select OK by pressing in the navigation key
13. Press END. Programming is complete.
Kyocera 2255
1. Press the 1 key six times (111111) “Option will be highlighted
2. Press OK
3. Scroll down to “Programming” and press “OK”
4. Enter OTKSL and press the navigation key
5. “Service Options” will appear scroll down to the “Basic NAM1 Info”
6. Press OK
7. Select Phone Number by pressing OK
8. Enter MIN and press OK again
9. Scroll to Home SID and press OK
10. Enter SID (4654) and press OK
11. Press END. Programming is complete.
QCP 2035
1. Press 1 six times (111111)
2. Press u key to select OPTIONS
3. Highlight PROGRAMMING and press u key
4. Enter OTKSL
5. ESN will appear press left arrow key to select OK
6. Enter MIN and press з key
7. Press з key again to exit - Programming is complete
Sanyo
Sanyo 4000 4500 4700 5000 6000
1. Press ##
2. Enter the OTKSL
3. Scroll to SAVE and press OK
4. ESN will be displayed – press OK
5. Enter 10 digit MIN and press OK
6. Enter SID (4654) and press OK
7. Press OK twice
8. Programming is complete
Sanyo 5150 5300 and 6400
1. Enter ## followed by the OTKSL
2. Press MENU SAVE PHONE #
3. Press Ok
4. SVC Programming will be displayed. Scroll and highlight Mobile Number. Press OK
5. Press OK again
6. ESN will be displayed. Press OK
7. Mobile Number will be displayed enter the 10 digit MIN press OK
8. Press OK 4 times
9. Phone will power cycle
10. Programming is complete
Sanyo 6000
1. Press ##
2. Enter OTKSL
3. Press MENU Key and scroll to SAVE PHONE # and press OK
4. ESN will be displayed press OK
5. Enter MIN and press OK
6. Enter SID and press OK
7. Press OK twice more
8. Programming is complete
Sanyo 4900
1. Enter ## followed by the 6 digit OTKSL
2. Press the MENU/OK key and scroll and highlight SAVE PHONE #
3. Press MENU/OK
4. Scroll and highlight MOBILE NUMBER press OK
5. At the ESN display press OK
6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times
7. At the service program menu scroll to exit and press the MENU/OK key.
8. Programming is complete
Sanyo 6200
1. Enter ##
2. Enter OTKSL
3. Press the MENU key and scroll to highlight SAVE PHONE #
4. Press OK
5. Scroll and highlight MOBILE NUMBER
6. Press OK twice
7. Scroll and highlight EXIT
8. Press OK
9. Phone will power cycle
10. Programming is complete
Toshiba
Toshiba 2032P
1. Slide the Radio Standby Switch on the left side of the device to the upper side (ON) to activate the phone function. This is the switch with the phone icon over it
2. After power up is completed use the stylus to tap on the ADMIN pull up menu at the bottom of the screen and select ACTIVATION WIZARD. If your device has not yet been activated the ACTIVATION WIZARD will automatically start when you turn on the radio in your device.
3. Tap NEXT 3 times. If the device has been previously activated it will require only 2 presses.
4. On the fourth screen enter the 6 digit OTKSL using keyboard
5. Enter the MIN in both entery fields then tap NEXT
6. Wait for the device to initialize and display “ready to connect”
7. To initiate IOTA tap the word ADMIN at the bottom of the display and then Data Provisioning
8. Programming is complete
*******
Here is a list of various codes to try out. Some may require an MSL to be able to make full use of the functionality.
##2769737 [##BROWSER] - MiniBrowser Settings (2G)
##8626337 [##VOCODER] - Set Vocoder
##3282 [##DATA] - Setup Menu for Vision handsets
##8463 [##TIME] - Airtime Menu
##040793 - Debug Menu
##786 [##RUN] - Technical Information (be careful with this one, you can reset the handset)
##932 [##WEB] - IP Address information (2G)
##889 [##TTY] - TTY On or TTY Off
##4357 [##HELP] - Help
synertek
Code for NAM Programming Mode : Synertek S-200
NAM Set : [MENU] [0] [SPC CODE]
Test Vibro/Rx/Tx/ [#] [#] [5] [5] [5] [5] [SAVE]
Debug Screen: [#] [#] [3] [3] [SAVE]
Debug Screen: [#] [#] [5] [2] [3] [SAVE]
Unknou Code !!!: [#] [#] [3] [2] [5] [SAVE]
Rf Test: [#] [# ][#] [#] [SAVE]
curitel
Code for NAM Programming Mode : Hyundai hx510b/h100/h150(Curitel)
NAM Set: [#] [#] [2] [0] [0] [2] [2] [0] [0] [2] [PWR] [1] [SPC CODE]
Field Teste :[#] [#] [2] [0] [0] [2] [2] [0] [0] [2] [PWR] [1] [MASTER CODE]
Enter A-KEY: [2] [5] [3] [9][*][*]
Debug Menu: [#] [#] [2] [7] [7] [3] [2] [7] [2] [6][PWR]
SAR Test: [#] [#] [2] [7] [7] [5] [2] [3] [4] [5] [PWR]
Baud rate: [#] [#] [3] [6][*][*] [PWR]
DM mode Enable:[*][*] [1] [0] [0] [4] [PWR]
DS mode Enable:[*][*] [1] [0] [0] [5] [PWR]
Test Bell/Led/Voice/Dot:[#] [#] [1] [1] [2] [2] [PWR]
RF mode: [#] [#] [2] [2] [4] [0] [PWR]
RAS RAM: [#] [#] [2] [7] [7] [4] [PWR]
CMUX 1:[*][*] [0] [4] [8] [1] [PWR]
CMUX 2:[*][*] [0] [4] [8] [2] [PWR]
RX mode FAX:[*][*] [0] [4] [9] [2] [PWR]
RX mode DATA:[*][*] [0] [4] [9] [1] [PWR]
RX mode RESET:[*][*] [0] [4] [9] [0] [PWR]
Audiovox 107 45680*47*869#1
Audiovox 120 #86904**89397#
Audiovox 130,100,8300,8600 ##20022002"END"1
AUDIVOX 7900 MENU#ПИСЬМО*1 10СЕК
Audiovox 4000,9500 289F#1
CyberBell 100 ##1475369908##"save"
Ericsson 923885"Menu"
EVRC #763*FF
GTRAN GCP-2000 01#737
Hunday-110 #86904**89397#
Hunday-600 ##20022002"END"1 код 100499
LG-300 "Menu" 9
LG-330 "Menu" 40
LG CX300V Menu 0
LG-800 "Menu" 0
U-200 ##343587 test menu,##343586 factory test
Pocket PC
diag ##778#
##3282#
Motorola V3
#073887*
Sky menu 50
______________
______________________________________________________________________________
#758353266#646# номер телефона
#7583538324#8378# test menu
#758353266#2539#
#8767#277#
#758353266#476#
#7583538324#7523#8378#
SKY 1400,3000,5000,5100,5400 (изр) #7583538324#626#
SKY 5100,5400,6100,6200 (кор) *759#626*7388464#
SKY 6400,8300 *759#364*7388464#
SKY 6200 SPC 147000
VK-X100 153147539741593 вверх
подключение- menu 40, или 50
______________________________________________________________________________________________________
epsilon vc-5x **321456987##, SPC view: **3214569871472365## или **3214569871472356##
SPC не менять на 000000 (обычно 111111)
Port baud rate:
[menu] - [0] - [3]
______________________________________________________________________________________________________
WCE-100,200,300 ##948487 ok
LG-225 ##2342# ##2539#
LG DM510 menu 3 0 далее код
lg 2130 #542362#*542362*
lg 5225 ##2342#,##8626337# - вокод ##2539#
______________________________________________________________________________________________________
kompal 2100 **321456987##
______________________________________________________________________________________________________
CMP-3 программирование 45680*47*869#1,45680*47*869#3,45680*47*869#6,screen test mode menu 0,DM mode menu 66,A-KEY 2539# удерж
CDM-135 программирование ##20022002 END
PCX-350XL программирование ##2726 SEND 1998 1 SPC 1
CDM 4000A программирование при включении 289 F # 1 или 000 F # 1,DM при включении F 00 000000 8 Diag Mode,Если нет сервиса- F 5 1 Home Only,A-Key 2539 FF
7900 menu # ( далее нужно нажать клавишу с конвертом ) *1,(быстро: Menu_ #_ (_ *_1 )
CDM-8100 программирование ##20022002 END
8410 ??? ##7738 END ???
8450 программирование ##20022002 END A-Key 2539**
CDM-8500 программирование ##20022002 END A-KEY 2539**
CDM 8610,8910 программирование ##27752345end,##737247end,##847446,##20022002 END,spc 000000 или 111111
CDM 9100A программирование при включении 289 F # 1 или 000 F # 1
CDM 9500 программирование при включении 289 F # 1 или 000 F # 1,2539 FF
HUN 310,610 2539 menu menu
Curitel 525 Rebuld NV ##03*934#9367*192#397#7412569746 end ##27732726 - вкл/вык RUIM
______________________________________________________________________________________________________
SCH-A100 режим *580 9540*45680 - TEST - 39 - 1 -02,потом в DM,ввел run a100 и сбил ESN на В0000000
SCH-A302 программирование 47*869#08#9 A-Key Menu 25**
SCH-A310 программирование MENU 6* Debug MENU 0* DM MENU 0* 000000 5
SCH-A350 программирование 47*869#08#9 A-Key Menu 025##
SPH-A460,A500 программирование ##000000 A-Key ##2539 OK Test mode 47*869#1235
SCH-A530 программирование MENU 6* DM Menu 9*5 47*68#13580
SCH-A562 программирование 47*869#08#9
SCH-A560 ##000000## 47*869#1235
SCH-A610 программирование MENU 92* DM MENU 9* 000000 5
SCH-A612 программирование 47*869#08#9
SCH-A620 программирование ##000000 ##3282 OK PRL ##786 OK
SCH-А640 73-бат, 155-ауд
SCH-A650 программирование MENU 6* DM MENU 9* 5
SCH-A660 ##000000 ok ##3282 ok 47*869*12358
SCH-A670 программирование MENU 72* A-Key 47*68#13580(29reb eeprom,02и69end) с меню программирования
SCH-A680 программирование ##000000## ##2539#
SCH-A800 мин ##000000##, ##2539#, 47*869#1235
SCH-A840 ##000000##, ##2539#, 47*869#1235
SCH-A860 ##675Ok ##2539 ok
MM-A900 ##000000 47*869#1235 ##2539#
A920 ##000000 47*869#1235 ##2539#
-----------------------------------------------------------------------------------------------------------------------------
SCH-E120 программирование 6548#0**4#6 домик 0 6725 57.600
SCH-E130 5809540#45680 далее 81(вроде точно непомню) нажать 1 потом ок, при необходимости #02 (как снимать user code)
SCH-E140 программирование 6548#0**4#6
SCH-E170 программирование 6548#0**4#6 или 74153697193 MENU (долго держать) 0 6725 2 SIO USB-U1
SCH-E250 программирование 6548#0**4#6 или 74153697193 ENG Menu My Phone 5 заходишь в тест меню 5809540*45680 в 93 ячейке ставишь 1 и ок, потом 02, после этого спц будет 000000
SCH-E300 программирование 74153697193 A-Key с меню программирования
SCH-E470 программирование 74153697193
SCH-E560 программирование 74153697193
-----------------------------------------------------------------------------------------------------------------------------
SCH-N101 программирование 47*869#08#9 A-Key MENU 025## 47*869#1235 47*68#13580
SCH-N105 программирование Menu 60 A-Key MENU 025##
SCH-N182 программирование 47*869#08#9 DM Menu 4 9 *759#813580
SCH-N195 программирование MENU 6*
SCH-N240 программирование ##000000 Debug menu 80 код 040793 DM Menu 82 (0000 или 4016) 0
SCH-N300 программирование ##000000
SCH-N315 программирование 47*68#13580 29 реб еепром,32(0-сио,1-тест мод,2-тест мод),02 вых
SCH-N362 программирование MENU 7*0415 DM 47*68#13580 021
SCH-N356 menu 6* 2539** test mode **00##,**837## 058 Clr LifeTime
SCH-N380 menu 6*, 47*869#08#9 test mode 47*869#123580 или меню 5* 123456
SCH-N392 программирование MENU 7*0415
SCH-N400 программирование ##000000 A-Key ##1111 OK Debug Menu 010 (040793) Test mode 47*869#1235 57.600
SCH-N500 menu 5* 47*68#13580
--------------------------------------------------------------------------------------------------------------------------------------------------------
SCH-X250 программирование 47*869#08#9 Debug menu 40
SCH-X350 программирование 47*869#08#9
SCH-X420 программирование 47*869#08#9
SCH-X430 программирование 47*869#08#9 или 6548#0**4#6 88-clear EFS,домик 0-6720,9720,9725,1973,6725
SCH-X460 программирование 47*869#08#9 5809540*45680
SCH-X580 программирование 6548#0**4#6
SCH-X590 программирование 6548#0**4#6 или 47*869#08#9
SCH-X700 программирование 6548#0**4#6
SCH-X720 программирование 6548#0**4#6 или 47*869#08#9
SCH-X780 программирование 47*869#08#9
-----------------------------------------------------------------------------------------------------------------------------
SCH-V420 программирование 74153697193
SCH-V450 программирование 74153697193 DM удерж Menu и 0 0 6725 2 Sio
SCH-V540 программирование 74153697193
SCH-V740 меню 7 * код 0415----прог,меню 8 * код 0415---SIO Port map UART1. Speed setting - 115.2
SCH-V840 программирование 74153697193 DM удерж Menu и 0 0 6725 2 Sio
39 дм интерфейс
-----------------------------------------------------------------------------------------------------------------------------
S140 программирование 74153697193
S250 программирование (фотоаппарат) 74153697193
-----------------------------------------------------------------------------------------------------------------------------
SCH-411 программирование 47*869#08#9 A-Key MENU 025## DM Menu 49
SCH-611 программирование 47*869#08#9 A-Key MENU 025##,Test mode*759#813580,39#1 Ok DM Mode,53#000 Ok СБРОС ВЫХОД 02,Откл внешн аудио Menu 0 #### OFF
SCH-811 программирование 47*869#08#9 DM Menu 49#STO A-Key Menu 025##
______________________________________________________________________________________________________
T-182 service program ##298645665 {END} 000000 #
Motorola MS-400 5759789*# 3раза кнопка камера сбоку 915037 кпст 112249
Motorola V710-730/MS150 8378*#+3 раза на кнопку диктoфона; SPC: 071082 М 073887*
Motorola V740: 8378*#+3 раза на кнопку NATE; SPC: 071082
Programming Menu: Menu + 0 + 73887 + * (Security Code: 000000)
Enable Test Mode: Menu + 00 + ** + T E S T M O D E + *
Disable Test Mode: Menu + 00 + ** + T E S T O F F + * 8378*# и 3 раза кн.диктофон
Enter/Exit Text Mode: Menu + LeftOpt
Enter Operator Codes: Menu + 048263 + *
NAM Programming Menu: P H O N E (7 4 6 6 3) + # + Menu + Menu
Vocoder Menu: ## + VOCODER (8 6 2 6 3 3 7)
у моторов этот спц 112249
MOTOROLA V8160 FCN 13 раз цифра"0" RCL,Сделать полный сброс FCN 00**83786633 STO далее 32# 01#
Пароль на MOTOROLA без а -кей 915037 5 7 5 9 7 8 9 * # потом кнопку камеры 3 раза
l7C #073887*
______________________________________________________________________________________________________
SonyEric T608: *#06#; SPC: 111111 ##923885 4.digite 18*0 master reset 18*1 master clear
______________________________________________________________________________________________________
NOKIA 3586i *3001#12345#,2539 end end
NOKIA 8587 *#626#7764726#
NOKIA 6585 обнул спс,всего тел и потеря сети 8-) - *#7370#
спринтовые нокии ##3282# - настр,##spc#,##2539#
Выбор режима CDMA ##7738#
______________________________________________________________________________________________________
TOSHIBA 9100 / 9155 / 9500 ================= В течении 10 сек. после включения 289 FCN #1
______________________________________________________________________________________________________
Программирование Юлайна 210 скор 115mode reset Конец Инструкции по программированию AKey.
______________________________________________________________________________________________________
Kод для проверки таймера на KYOCERA/SAMSUNG (американский рынок) #786 ok
Kод для настройки web-браузера KYOCERA ##2769737 ok
____________________________________________________________________________________________
Getrun 2000
System NAM programming mode:
Набрать 0 + 1 + # + 7 + 3 + 7 + SECURITY CODE (000000)
Debug menu:
Набрать 0 + 1 + # + 3 + 2 + 4 + SECURITY CODE (000000)
Debug screen of field test mode:
Набрать 0 + 1 + # + 7 + 2 + 7
Test mode:
Набрать 0 + 1 + # + 7 + 6 + 4 + SECURITY CODE (000000)
System test mode:
Набрать 0 + 1 + # + 7 + 6 + 8 + SECURITY CODE (000000)
____________________________________________________________________________________________________________________________
ZTE-C150
*983*3641# 2539
#073887*
bitpim считывает его без проблем может даже не с первого раза но считывает,в вкладке filesystem,папка nvm, смотри в nvm 000002, шесть цифр которые ты там увидишь это и есть твоя спс.
ВСЕ.
Комментариев нет:
Отправить комментарий